There are links in this site that can be defined as "affiliate links". This mean that I may receive a small commission which has no cost to you

What Is Backlight Bleed and How Can You Fix It?

LCD’s are susceptible to backlight bleed, which is when light leaks around the edges or corners of a screen. Luckily, there are a few ways to fix this – here’s how!

Do you want to have the best quality of the picture on your computer? The backlight bleed is something many people do not know about and can be avoided if followed correctly. If this isn’t done, all kinds of problems may arise, such as poor quality control or manufacturing errors causing light-emitting diodes at the edges for various displays, making them difficult to look through (especially when watching movies).

Are you considering buying a new LCD monitor but don’t understand what possible issues could come from owning these types of monitors? Technology is always changing, but Backlight Bleed – where LED’s leak out around corners- has been a recurring issue for years.

Which type of monitor do you want? TN, VA, or IPS? When it comes to dark content on your screen while using the computer in a darkened room, one thing can make all of them look bad. The brightness can be blinding at times and make it difficult to see what’s going on.

What Is Backlight Bleeding?

The light bleed can be distracting, leaving your screen looking like a hot mess. It’s not just an aesthetic problem either; it also affects the display quality and how well you’ll see on-screen content in certain environments.

LED displays are known for their vibrant colors and immaculate picture quality, but unfortunately, they’re prone to backlight bleed. As a result, the light from the screen flashes through and sometimes even spills over into other areas of your display, so all that brightness is distracting. Not only does this happen on laptops, but it happens with many smartphones too!

Do you have too much backlight bleed in your display? If so, there is a way to reduce it. Simply RMA the problem and hope that they fix it!

How to Fix Backlight Bleed?

Backlight bleeding is a common problem in most modern televisions. It’s typically not too noticeable, but it can be more distracting if you watch something dark or play games with darker environments/enemies.

This specific design ensures that light doesn’t reflect on anyone’s point too intensely and reduces glare in different lighting conditions.

There are times when people notice a small, tiny flashing light on their phone’s screen. The reason is that the person has been watching content with darkness and shadows for too long.

The “glowing patches” you may be seeing might not just be from eye strain or having your eyes closed while reading in bed. It could also mean that there is a problem happening inside of your smartphone, like pixels constantly dying out because they have to work so hard to display black colors all day, all night!

It’s a dirty trick, and it does not just refer to pointing a light at your screen. Ever notice that your screen seems brighter when you are looking off to the side? This is because of something called “light leakage” or glare.

I’m not sure I can pinpoint a specific issue with my monitor, but the backlight seems to be bleeding through. Some people recommend returning it for an RMA if you are experiencing this problem often; however, some manufacturers may refuse service and instead want you to purchase another display– so make your choice wisely.

There are many techniques to reduce backlight bleeding; let’s discuss them:

  • Take the display apart and apply electrical tape around the edges to make it more durable against wear and tear as well as scratches on surfaces like tables or desks.
  • If exposed, gently loosen screws at the back of the screen (can reduce flashlight).
  • The prominent backlight bleeding can be reduced with a microfiber cloth; rub the area gently and carefully to avoid damaging its screen in any way
  • Reduce your monitor’s intensity until you no longer notice any sort of clouding due to the light from this process interrupting your viewing experience or causing pain towards people who are sensitive to bright lights
  • Enable local dimming if it supports this feature so that there will not overlap where one color bleeds into another.

Backlight bleeding is an inherent issue with most LCD screens and can be difficult to avoid. However, it differs from IPS glow which has a range of factors that affect the intensity–including screen brightness and distance between you and the display.

Why does Backlight Bleed happen:

Backlight bleeding is a screen defect caused by the deviation of liquid crystal alignment at different angles on your monitor. These deviations cause pressure inside your display, displacing said liquid crystals and causes light to penetrate in some places more than others.

It’s usually not something that will happen during day-to-day use, but it can be seen when viewing dark colors or low-intensity images for an extended period – such as if you were watching Netflix all night long!

How to Avoid Backlight Bleeding:

There are several reasons for this bleed-through: the LCD panel is too thin and cannot handle as much pressure from behind. When this happens, it can cause unsightly shadows and colors anomalies on your screen if you are gaming or watching movies with dark scenes.

This does not mean these problems will affect every model, but in most cases, they can be unnoticeable when viewing something like a Word document at full brightness! If you want to avoid any potential issues, then look out for OLED displays that don’t suffer from this issue due to their ability towards deep blacks without using an additional filter layer that would scatter away some of its intensity.

If you want your TV to be perfect, do not settle for a model that has any bleeding or burn-in. Doing so will make sure all colors are vibrant and clear instead of muted by dots in one corner, like some models have been known to suffer from.

Is there a way to Prevent Backlight Bleed happening in the Future?

Sadly, all displays that use an active backlight will have a degree of bleeding on the screen. The only way to avoid this is by investing in OLED screens that are very expensive and will not likely go down in price anytime soon.

There are many ways to experience the latest movies and video games in different settings. Some people prefer TVs with minimal backlight bleeding, which can be found by reading product reviews before purchasing them.

So rather than thinking about how you’re going to avoid it entirely, why not think through what displays have little-to-no light leakage? This is just as easy as finding out if a monitor/TV has been reviewed well on sites like Amazon or other professional ones that offer customer feedback.

Types of Backlight Bleeding:

When it comes to viewing your computer or TV, you want the best possible picture. That’s why backlight bleeding can be so devastating for those of us with picky eyes who are passionate about their visuals and what they see on screen. There are two main types of this issue:

Clouding: Sometimes, the screen of your camera will be unreadable because patches on it make light and dark spots near each other. As a result, the lights behind the display seem concentrated in one area, while another looks darker. You can tell this by looking closely at a white background or an all-black picture with regular lighting; you should see irregularly shaped bright areas where some parts have more backlight than others!

Sometimes when I take pictures using my phone’s camera app. I notice unusual shapes on the image once they’re saved to my gallery – these may look like cloudy patterns, which could either mean that something is blocking part of the lens, or else maybe there was just too much light for those regions?

Flash lighting: it is a phenomenon where the center of the display stays in darkness, and just tiny flashes exist on its edges. This might not seem like much when it first starts, but as you get closer to your phone’s advanced stages, those small light bursts will become more frequent until they are all that can be seen.

Final Thoughts:

Although backlight bleeds are not typically too big of a deal for most displays that use LED backlights as their primary source (though they do tend to affect quite a few screens). There is something very off putting and frustrating when part or even half of our monitor has more than just pixels shining through—especially those pesky reds!

If we didn’t fix this issue either, you might need to lower the brightness on your screen instead of putting up with an annoying light beam in one corner of the screen all day long!

Also See:

Leave a Comment

Your email address will not be published.