There are links in this site that can be defined as "affiliate links". This mean that I may receive a small commission which has no cost to you

how to clean ips monitor

How To Clean IPS Monitor

Cleaning your monitor is an important part of extending its life. Dirty monitors can lead to image flickering and dark spots on the screen. IPS monitors are the best for viewing your computer screen. They get dirty, though!

You don’t need to worry about a rip-off or damaging your monitor when you clean it. Cleaning your monitor is so easy and only takes 10 minutes.

The following guide is intended to help you clean or maintain your monitor. You’ll find information about the necessary tools, appropriate cleaning products, and recommended techniques for cleaning an IPS monitor.

What is IPS Monitor?

IPS monitors are also called In-Plane Switching or Plane to Line Switching (PLS) display panels. The major difference between IPS and the other two technologies is that it expands the viewing angle horizontally and vertically so that the image quality is not degraded.

The best part about this technology is that even if you move far away from the monitor, you won’t see any loss of colors due to off-axis viewing.

In simple terms, The reason for this is because the color reproduction is based on the IPS panel’s ability to reproduce the same shade of color from any angle of view.

This means that, unlike a TN panel, your screen won’t change colors when viewing it from different angles. Enabling you to enjoy the smooth gameplay, free from artifacts and other stuttering effects.

How to Clean IPS Monitor: Step by Step

To clean the screen of your IPS monitor, you will need multi-purpose materials.

  • A lint-free soft microfiber cloth.
  • distilled Water 
  • Isopropyl alcohol
  • some free time

Guideline:

Here are some guidelines to clean IPS monitor

Step 1: Unplug the IPS monitor. Remove the power cord from the back of the monitor and place it in a safe place.

Step 2: Wipe down all sides of the screen with a lint-free microfiber cloth. Be careful not to press too hard on any area of the screen as this may damage it. If you notice any dirt or dust that has not been removed by using just water, repeat this step until it is gone.

Step 3: Place a microfiber cloth on a flat, dry surface and dampen it with distilled water. It should be damp but not drippy or wet; if you have trouble gauging this, just try testing on a small corner of the cloth first.

Step 4: Wipe down your entire monitor with gentle circular motions, making sure not to get any moisture inside any openings or ports in its casing (like USB ports or audio jacks). You want to make sure there’s no residue left behind that can corrode or damage the internal components of your monitor over time! 

Step 5: If you notice any grime or smudges again after doing this, use an alcohol-free cleaning solution instead of just water alone—you don’t want anything stronger than that getting into those openings and damaging anything!

Step 6: Before you plug your IPS monitor in, wipe it down with a dry cloth. This will help to prevent any moisture from being trapped inside the monitor and causing it to malfunction.

Difference Between IPS Panel Monitor & Other Panel Monitor

  • IPS monitor is the best, with the high-end panel to display vivid color and high brightness. 
  • Other types of monitors, such as VA, TN, and PVA, offer limited viewing angles compared to the IPS’ more expansive view. 
  • Complemented by a response time 4 times faster than VA panels, IPS displays deliver accurate colors without motion blur or ghosting.
  • Another benefit of an IPS monitor is its ability to handle motion blur much better than TN panels,
  • Best for graphic designers, photographers, and others who need consistent color across the display.
  • The image provided by an IPS panel is much more accurate and consistent than that of TN panels.
  • IPS monitors have a wider viewing angle, better color accuracy, and more vibrant colors than other monitor types. 
  • VA had a wide viewing angle, but it was not the same as IPS in terms of contrast and resolution.
  • Each pixel on an IPS screen can be quickly adjusted to display more realistic colors, resulting in crisp images and text. 
  • An IPS monitor can reach up to 72% coverage of the sRGB space, which is higher than most other monitors.
  • The major difference is that the PVA panel is a resistive film, and it is much easier to make larger-size displays. 
  • IPS panels use capacitive-resistive technology. Compared with PVA panels, IPS monitors have a better viewing angle (170 degrees).
  • The two most popular panel types are IPS and VA, or “vertical alignment”. There are many others, including P-IPS, H-IPS, AH-IPS, and E-IPS, but these are less common than their counterparts.
  • IPS stands for “In-Plane Switching,” which is a type of LCD technology. 
  • The front surface of the panel is coated with an alignment layer that regulates the orientation of liquid crystals within it.
  • All color changes occur perpendicular to the screen surface rather than tilting towards or away from the observer. 
  • Compared with other TFT (Thin Film Transistor) panels, this technology provides a greater viewing angle and wider color gamut.

Safety Precautions While Cleaning IPS Monitor

When cleaning an IPS monitor, it is important to take precautions to avoid damaging the screen. The following safety precautions should be taken when cleaning an IPS monitor:

  • Use only soft microfiber cloths and lint-free cloths to clean your monitor. Never use paper towels or abrasive materials.
  • Do not spray cleaning solutions directly onto your monitor or into its vents, as this may cause damage to the internal components. Instead, spray the solution onto a cloth and then wipe down the screen of your monitor with this cloth.
  • Avoid using soaps or detergents when cleaning your monitor since these products may leave residue on your screen that can cause damage over time.
  • Never use a spray bottle or any other type of liquid cleaner on your monitor without first testing it on a small section of the screen. This will allow you to see if there is any damage caused by using the cleaner before moving forward with cleaning your entire screen.
  • Never use high alcohol-based solutions (such as Windex) on your IPS monitor’s screen; these can cause damage over time due to their high alcohol content!
  • To avoid electric shock, always unplug the power cord from the outlet before cleaning or maintaining your monitor.
  • Avoid using a vacuum cleaner, as the dust particles generated might scratch the screen.
  • It is important to keep your monitor clean and free of dust. This will help to maintain the quality of the video image displayed on your computer screen. 
  • Do not use any type of abrasive cleaner or other chemical solvents on it as it may damage its surface coating, which could cause permanent discoloration and/or other damage that will not be covered under warranty.
  • Do not press down too hard on the keys of your keyboard when typing or using them, as this may cause damage to internal components such as circuit boards and circuit traces that connect various components together, causing them to fail over time if left unchecked!

How to Remove Scratches from IPS Monitor

If you have an IPS monitor, you’ve probably noticed that it’s prone to scratches. While this isn’t a problem with most monitors, it can be frustrating when you find a scratch on your IPS screen. There are ways to remove these scratches and keep your monitor looking great.

1. Clean the screen with a dry, soft cloth or microfiber cloth.

2. Apply a thin layer of toothpaste to the scratch and let it sit for about 3 minutes.

3. Wipe off the toothpaste with a clean, soft cloth.

4. If needed, repeat steps 2 and 3 until the scratch is gone or is as small as possible

Which Surface are Better, Matte or Glossy Finishes?

Matte and glossy finishes are two of the most popular coatings for contemporary furniture. Matte Finishes A matte finish will hide slight imperfections in the furniture and give a warm, organic feel to your room.

Matte finishes come in all different thicknesses, from a light satin to a heavy eggshell. The thicker the finish is, the less likely it is to scratch off with everyday use.

High-quality matte finishes are usually sprayed onto cabinets, while flat or low gloss paints are used on countertops and other surfaces where they don’t need extra protection.

Final Words 

In this tech guide, we will be looking at the various methods to clean your monitor. We will start off with effectiveness for the different types of cleaning products, site special purpose wipes, and cloths.

The cleaning off the monitors, should be careful, and you should use the anti-static liquid. The anti-scratches screen protectors are another useful precaution to retain your monitor’s condition at its best.

Regardless of the reason why keeping your monitor clean will maintain the contrast and color of your monitor. Keeping it clean will also prevent dirt from accumulating on your screen, which could hamper your visibility as you work.

Leave a Comment

Your email address will not be published. Required fields are marked *